The objective of this work was to study the effect of the Ni distribution on the reactivity and densification of WC-(Fe/Ni/Cr) composite powders. For such, stainless steel AISI 304, was used as a binder base composition which was enriched with Ni by three different processing methods: WC sputter deposition using a target of stainless steel with Ni discs, conventional wet milling of commercial powders (WC, stainless steel and Ni powders) and a previous coating of the WC particles with Ni, followed by the conventional mixing of this coated powder with stainless steel powder. The reactive sintering of these composite powders with identical compositions was investigated. The powder compacts were characterized by scanning electron microscopy and X-ray diffraction with Rietveld analysis to quantify de crystalline phases present.