An electrically assisted regeneration (EAR) process was used to assess the effectiveness of regenerating exhausted granular activated carbon (GAC) preloaded with electroplating wastewater containing hyper Zn concentration at a concentration of 950.5mgL (-1 )(1.45x10 (-2 )molL (-1 )). The electrochemical rege-neration process supplied with direct current was controlled at a constant voltage of 5.0V. Two regeneration methods were tested and compared: first, acid washing (pH 1.0) and, second, electrically assisted acid washing. Results showed that the Zn adsorption capacity of GAC regenerated by EAR was significantly higher than that of GAC regenerated by acid washing. The effectiveness of the Zn desorbing efficiency from GAC was enhanced by electric current in the electrochemical regeneration process. Using the EAR method, a regeneration efficiency of 88.3% was observed for GAC, whereas using acid regeneration, the efficiency was only 25.3%. These observations reveal that EAR could be a potential alternative to acid washing for the regeneration of GAC saturated with Zn.