This work deals with the design and experimental implementation of a MPP-tracker for photovoltaic systems, which is a high efficiency dc/dc boost converter operating in continuous conduction mode (CCM). The converter is able to draw maximum power from the PV panel for a given solar radiation level and environment temperature by adjusting the duty cycle of the converter. Additionally, a passive nondissipative turn-on turn-off snubber is used, so that high efficiency and reduced electromagnetic interference (EMI) levels due to the soft switching operation can be obtained. The snubber improves the converter efficiency since the energy that would be dissipated during turning on and turning off is transferred to the load. The control technique, implemented with a single-chip microcontroller 80C51, is based on the perturbation and observation method, where the maximum power point is tracked with periodical calculation of the panel output power. Simulation and experimental results describe the performance of the proposed MPP-tracker. (c) 2005 Published by Elsevier Ltd.