Systems using molten salt as thermal media have been proposed for solar thermal power generation and for synthetic fuel production. We have been developing molten salt solar receivers, in which molten salt is heated by concentrated solar radiation, in the Solar Hybrid Fuel Project of Japan. A cavity shaped receiver, which is suitable for a beam-down type solar concentration system, was considered. In order to design molten salt solar receivers, a numerical simulation program for the prediction of characteristics of receivers was developed. The simulation program presents temperature distributions of a receiver and molten salt with the use of heat flux distribution of solar radiation and properties of composing materials as input data. Radiation to heat conversion efficiency is calculated from input solar power and heat transferred to molten salt. The thermal resistance of molten salt and the maximum discharge pressure of molten salt pumps were taken into account as restrictions for the design of receivers. These restrictions require control of maximum receiver temperature and pressure drop in the molten salt channel. Based on the incident heat flux distribution formed with a 100 MWth class beam-down type solar concentration system, we proposed a shape of solar receiver that satisfies the requirements. The radiation to heat conversion efficiency of the designed receiver was calculated to be about 90%. (c) 2006 Elsevier Ltd. All rights reserved.