This study addresses the single-step thermal decomposition (pyrolysis) of methane without catalysts. The process co-produces hydrogen-rich gas and high-grade carbon black (CB) from concentrated solar energy and methane. It is an unconventional route for potentially cost effective hydrogen production from solar energy without emitting carbon dioxide since solid carbon is sequestered. A high temperature solar chemical reactor has been designed to study the thermal splitting of methane for hydrogen generation. It features a nozzle-type graphite receiver which absorbs the solar power and transfers the heat to the flow of reactant at a temperature that allows dissociation. Theoretical and experimental investigations have been performed to study the performances of the solar reactor. The experimental set-up and effect of operating conditions are described in this paper. In addition, simulation results are presented to interpret the experimental results and to improve the solar reactor concept. The temperature, geometry of the graphite nozzle, gas flow rates, and CH4 mole fraction have a strong effect on the final chemical conversion of methane. Numerical simulations have shown that a simple tubular receiver is not enough efficient to heat the bulk gas in the central zone, thus limiting the chemical conversion. In that case, the reaction takes place only within a thin region located near the hot graphite wall. The maximum CH4 conversion (98%) was obtained with an improved nozzle, which allows a more efficient gas heating due to its higher heat exchange area. (c) 2006 Elsevier Ltd. All rights reserved.