A stable thermal stratification in solarthermal storage tanks increases the energy efficiency of these systems. Especially in charging and discharging cycles, mixing occurs due to jet flows. The reliable prediction of the influence of the storage and of the charging device geometry on the loading behaviour is essential for the layout and improvement of stratified storage systems. A model approach for the computational calculation of the time-dependent temperature distribution in stratified storage tanks based on the one-dimensional heat transport equation is described in the present study. The numerical solution was obtained by application of the first order Upwind-discretization scheme. This basic approach was further refined by the consideration of charging jet flows and local turbulences in the area of stratification according to the strategies of Jirka (2004) and Mott and Woods (2009) and implemented in MATLAB. Two simulation examples of different complexity have shown that the enhanced model could increase the calculation accuracy in comparison to similar CFD and experimental studies. The results of the MATLAB program were reached with much less calculation effort than the results of the CFD simulation. (C) 2013 Elsevier Ltd. All rights reserved.