화학공학소재연구정보센터
Thin Solid Films, Vol.557, 36-41, 2014
Chemical vapor deposition processes for the fabrication of epitaxial Si-O superlattices
Band engineered Si/O superlattices are promising channel materials for ultimately scaled complementary metal oxide semiconductor devices. Theoretical calculations have indicated that insertion of O monolayers into Si lattice creates anisotropy in the Si band structure with an enhanced carrier mobility in the channel direction. However, the experimental demonstration of such superlattices is not straightforward, as it requires processes for the deposition of a monolayer of O on Si, and to continue the Si epitaxy thereon. In thiswork, we investigate processes for the fabrication of Si/O superlattices using the chemical vapor deposition technique. Ozone is used for the O deposition with control of the deposited O content at the monolayer level. The SiH4 based Si deposition is performed at lowtemperatures (500 degrees C-550 degrees C) in order to obtain a confined O monolayer in the Si superlattice. Si deposited on O layer of 1.2 Omonolayers is completely amorphous. This indicates that this O layer is extremely uniform as it prevents any epitaxial ordering with the substrate. Reducing the O content to 0.9 O monolayers in combination with a slower Si deposition favors epitaxial ordering of Si on O/Si. Finally a defect free Si epitaxy is demonstrated on the O monolayer. Such ordering of epitaxial Si on the O layer provides a promising outlook for the growth of superlattices. (C) 2013 Elsevier B.V. All rights reserved.