Macromolecular Research, Vol.22, No.10, 1050-1052, October, 2014
Preparation of porous carbon materials by using coagulated polyamic acid precursor
E-mail:
Polyamic acid film (PAA) with hollow pore structure was prepared by coagulating the,
4,4'-(hexafluoroisopropylidene) diphthalic anhydride (6FDA) and 3,3'-dihydroxybenzidine(HAB),
6FDA-HAB PAA, solution in a NMP into water bath. We successfully manufactured a porous carbon by carbonizing the coagulated 6FDA-HAB PAA at 1000℃. The carbon material with hollow pore structure showed a high specific surface area of 1668 m2/g.
- Imhof A, Langmuir, 17(12), 3579 (2001)
- Wang L, Sasaki T, Ebina Y, Kurashima K, Watanabe M, Chem. Mater., 14, 4827 (2002)
- Liang ZJ, Susha AS, Caruso F, Adv. Mater., 14(16), 1160 (2002)
- Qi L, Chapel JP, Castaing JC, Fresnais J, Berret JF, Langmuir, 23(24), 11996 (2007)
- Breen ML, Dinsmore AD, Pink RH, Qadri SB, Ratna BR, Langmuir, 17(3), 903 (2001)
- Velikov KP, van Blaaderen A, Langmuir, 17(16), 4779 (2001)
- Tedeschi C, Caruso F, Mohwald H, Kirstein S, J. Am. Chem. Soc., 122(24), 5841 (2000)
- Wang J, Kaskel S, J. Mater. Chem., 22, 23710 (2012)
- Bourgerrette C, Oberlin A, Inagaki M, J. Mater. Res., 10, 1024 (1995)
- Inagaki M, Morishita T, Kuno A, Kito T, Hirano M, Suwa T, Kusakawa K, Carbon, 42, 497 (2004)
- Ohta N, Nishi Y, Morishita T, Toji T, Inayaki M, Carbon, 46, 1350 (2008)
- Ha Y, Choi MC, Kim I, Ha CS, Kim Y, Han M, Macromol. Res., 18(1), 14 (2010)