Korean Journal of Materials Research, Vol.17, No.7, 366-370, July, 2007
MgO/Al2O3가 소결조제로 첨가된 Si3N4 세라믹스의 수열 조건에서의 부식열화 거동
Corrosive Degradation of MgO/Al2O3-Added Si3N4 Ceramics under a Hydrothermal Condition
E-mail:
Silicon nitride () ceramics have been considered for various components of nuclear power plants such as the mechanical seal of a reactor coolant pump (RCP), the guide roller for a control rod drive mechanism (CRDM), and a seal support, etc. Corrosion behavior of ceramics in a high-temperature and high-pressure water must be elucidated before they can be considered as components for nuclear power plants. In this study, the corrosion behaviors of ceramics containing MgO and as sintering aids were investigated at a hydrothermal condition (, 9.0 MPa) in pure water and 35 ppm LiOH solution. The corrosion reactions were controlled by a diffusion of the reactive species and/or products through the corroded layer. The grain-boundary phase was preferentially corroded in pure water whereas the grain seemed to be corroded at a similar rate to the grain-boundary phase in LiOH solution. Flexural strengths of the ceramics were significantly degraded due to the corrosion reaction. Results of this study imply that a variation of the sintering aids and/or a control (e.g., crystallization) of the grain-boundary phase are necessary to increase the corrosion resistance of ceramics in a high-temperature water.
- Oda K, Yoshio T, J. Am. Ceram. Soc., 80, 3233 (1977)
- Hirayama H, Kawakubo T, Goto A, Kaneko T, J. Am. Ceram. Soc., 72, 2049 (1989)
- A Technology Roadmap for Generation IV Nuclear Energy Systems, Generation IV International Forum, GIF-002-00, 2002 (2002)
- Kim WJ, Kang SM, Park KH, Kohyama A, Ryu WS, Park JY, J. Kor. Ceram. Soc., 42, 575 (2005)
- Park JH, Kim WJ, Park JN, Park KH, Park JY, Lee YW, Korean J. Mater. Res., 17(3), 160 (2007)
- Jacobson NS, J. Am. Ceram. Soc., 73, 6 (1993)
- Fox DS, Opila EJ, Hann RE, J. Am. Ceram. Soc., 83(7), 1761 (2000)
- Opila EJ, J. Am. Ceram. Soc., 82, 625 (1999)
- Sato T, Murakami T, Endo T, Shimada M, Komeya M, Kameda T, Komatsu M, J. Mater. Sci., 26, 1749 (1991)
- Somiya S, Mater. Chem. Phys., 67(1-3), 157 (2001)
- Oda K, Yoshio T, Miyamoto Y, Koizumi M, J. Am. Ceram. Soc., 76, 1365 (1993)
- Reddy NK, Mulay VN, Jaleel MA, J. Mater. Sci. Lett., 13(20), 1516 (1994)
- Kim WJ, Hwang HS, Park JY, Ryu WS, J. Mater. Sci. Lett., 22(8), 581 (2003)
- Sohn HY, Wadsworth ME, Rate Processes of Extractive Metallurgy, p.8, Plenum Press, New York (1979) (1979)
- Hackley VA, Paik U, Kim BH, Malghan SG, J. Am. Ceram. Soc., 80, 1781 (1997)