난류 용탕 In-situ 합성 믹서의 설계 및 Cu-TiB2 나노 복합재료의 제조

최백부; 박정수; 윤지훈; 하만영; 박용호; 박익민; Baek-Boo Choi; Jung-Su Park; Ji-Hun Yun; Man-Young Ha; Yong-Ho Park; Ik-Min Park

Korean Journal of Materials Research, Vol.17, No.1, 11-17, January, 2007

DOI10.3740/MRSK.2007.17.1.011 Export Citation

난류 용탕 In-situ 합성 믹서의 설계 및 Cu-TiB2 나노 복합재료의 제조

Design of Turbulent In-situ Mixing Mixer and Fabrication of Cu-TiB2 Nanocomposities

최백부, 박정수, 윤지훈, 하만영¹, 박용호, 박익민^†

부산대학교 재료공학부
¹부산대학교 기계공학과

Baek-Boo Choi, Jung-Su Park, Ji-Hun Yun, Man-Young Ha¹, Yong-Ho Park, and Ik-Min Park^†

School of Materials Science and Engineering, Pusan National University, Busan, 609-735, Korea
¹Department of Mechanical Engineering, Pusan National University, Busan, 609-735, Korea

E-mail:

Turbulent in-situ mixing process is a new material process technology to get dispersed phase in nanometer size by controlling reaction of liquid/solid, liquid/gas, flow ana solidification speed simultaneously. In this study, mixing which is the key technology to this synthesis method was studied by computational fluid dynamics. For the simulation of mixing of liquid metal, static mixers investigated. Two inlets for different liquid metal meet ana merge like 'Y' shape tube having various shapes and radios of curve. The performance of mixer was evaluated with quantitative analysis with coefficient of variance of mass fraction. Also, detailed plots of intersection were presented to understand effect of mixer shape on mixing. The simulations show that the Reynolds number (Re) is the important factor to mixing and dispersion of particles. Mixer was designed according to the simulation, and nano composites were evaluated. nano particles were uniformly dispersed when Re was 1000, and cluster formation and reduction in volume fraction of were found at higher Re.

Keywords:In-situ mixing;Static mixer;COV;Cu-based MMCs;Nanocomposite

[References]

Flom Y, Arsenault RJ, J. Met., 38, 31 (1986)
Moryensen A, Comie JA, Flemings MC, J. Met., 40, 12 (1988)
Chow TW, Kelly A, Okura A, Composites., 16, 187 (1986)
Ibrahim IA, Mohamed FA, Lavernia EJ, J. Mater. Sci., 26, 1137 (1991)
Wu Y, Lavernia EJ, Metall. Trans., 23A, 2923 (1992)
Ma ZY, Ning XG, Lu YX, Li JH, Bi J, Zhang YZ, Mater.Lett., 21, 69 (1994)
Baikalova YV, Lomovsky OI, J. Alloy. Compound., 297, 87 (2000)
Maruyama T, Onose S, J. Nuclear. Sci. Tech., 36(4), 380 (1999)
Lee J, Kim NJ, Jung JY, Lee ES, Ahn S, Scripta. Mat. Materialia., 39(8), 1063 (1998)
Koczak MJ, Premkumar MK, JOM., 1, 44 (1993)
Ottino JM, The kinematics of mixing: stretching, chaos, and transport, Cambridge University Press, (1989) (1989)
Myers KJ, Bakker A, Ryan D, Chem. Eng. Prog., 93(6), 28 (1997)
Yang HC, Park SK, Oh SW, Proceedings of the KSME 2003 Spring Annual Meeting., 1955 (2003)
Yang HC, Park SK, Oh SW, Proceedings of the KSME 2004 Spring Annual Meeting., 1957 (2004)
Fluent V6.1 Users Manual Users Guide, (2003) (2003)

[1] Flom Y, Arsenault RJ, J. Met., 38, 31 (1986)

[2] Moryensen A, Comie JA, Flemings MC, J. Met., 40, 12 (1988)

[3] Chow TW, Kelly A, Okura A, Composites., 16, 187 (1986)

[4] Ibrahim IA, Mohamed FA, Lavernia EJ, J. Mater. Sci., 26, 1137 (1991)

[5] Wu Y, Lavernia EJ, Metall. Trans., 23A, 2923 (1992)

[6] Ma ZY, Ning XG, Lu YX, Li JH, Bi J, Zhang YZ, Mater.Lett., 21, 69 (1994)

[7] Baikalova YV, Lomovsky OI, J. Alloy. Compound., 297, 87 (2000)

[8] Maruyama T, Onose S, J. Nuclear. Sci. Tech., 36(4), 380 (1999)

[9] Lee J, Kim NJ, Jung JY, Lee ES, Ahn S, Scripta. Mat. Materialia., 39(8), 1063 (1998)

[10] Koczak MJ, Premkumar MK, JOM., 1, 44 (1993)

[11] Ottino JM, The kinematics of mixing: stretching, chaos, and transport, Cambridge University Press, (1989) (1989)

[12] Myers KJ, Bakker A, Ryan D, Chem. Eng. Prog., 93(6), 28 (1997)

[13] Yang HC, Park SK, Oh SW, Proceedings of the KSME 2003 Spring Annual Meeting., 1955 (2003)

[14] Yang HC, Park SK, Oh SW, Proceedings of the KSME 2004 Spring Annual Meeting., 1957 (2004)

[15] Fluent V6.1 Users Manual Users Guide, (2003) (2003)