오스테나이트 스테인리스강의 극저온 특성

정찬회; 김순국; 이준희; 정세진; 김익수; Chan-Hoi Jung; Soon-Kook Kim; Jun-Hee Lee; Se-Jin Jeong; Ik-Soo Kim

Korean Journal of Materials Research, Vol.17, No.1, 37-42, January, 2007

DOI10.3740/MRSK.2007.17.1.037 Export Citation

오스테나이트 스테인리스강의 극저온 특성

An Extremely Low Temperature Properties of Austenite Stainless Steels

정찬회, 김순국, 이준희 ^†, 정세진¹, 김익수¹

동아대학교 신소재공학과
¹(주)NK

Chan-Hoi Jung, Soon-Kook Kim, Jun-Hee Lee^†, Se-Jin Jeong¹, and Ik-Soo Kim¹

Dept. of Advanced Materials Engineering, Donga University, 840, Hadan2-dong, Saha-gu, Busan, 604-714, Korea
¹NK CO., Ltd., 497, Shinpyung-dong, Saha-gu, Busan, 604-030, Korea

E-mail:

The effects of immersion time in the liquid nitrogen and deformation-induced martensitic transformation on the behavior of austenite stainless steels used for the hydrogen storage tank of auto-mobile at cryogenic temperature were investigated. With increasing of immersion time in the liquid nitrogen, the tensile strength of all austenite stainless steels at cryogenic temperature was increased because the martensite transformation of unstable austenite. The restraint of crack generation ana transmission also increased the tensile strength by the active transformation. The elongation decreasing of 321 steel is not the mechanical deformation of austenite phase but the stress induced martensite phase during the tensile test.

Keywords:An extremely low temperature . Austenite stainless steel . mechanical property

[References]

Kim SK, Jang CW, Lee JH, Jung CH, Seo YG, Kang CG, Korean J. Mater. Res., 16(8), 516 (2006)
Nakamura T, Tominaga M, Murase H, Nishiyama Y, Testu-to-Hagane, 69, 471 (1982)
Hoshino K, Mukai K, Testu-to-Hagane, 69, 631 (1983)
Baudrt G, Pineau A, Mater. Sci. Eng. A, 28, 229 (1977)
Suto H, Kaga H, J. Jpan. Inst. Metal, 37, 1158 (1973)
Chanani GR, Antolovich SD, Gerberich WW, Metall. Trans., 3A, 2661 (1972)
Bathias C, Pelloux RM, Metall. Trans., 4A, 1265 (1973)
Antolovich SD, Singh B, Metall. Trans., 2A, 2135 (1971)
Pineau AG, Pelloux RK, Met. Trans., 5, 1103 (1974)
Fukushima E, Goto A, Ito M, Fushimi M, J. Jpan. Inst. Metal, 36, 605 (1972)
Izumi H, Sunada H, Shinoda G, J. Jpan Soc. Strength & Fracture Meter., 14, 173 (1979)
Chanani GR, Antolovich SD, Metall. Trans., 5A, 217 (1974)
Tsuzaki K, Nakanishi E, Maki T, Tamura I, Trans. ISIJ, 23, 834 (1983)
Hennessy D, Steckel G, Altstetter C, Metall Trans., 7A, 415 (1976)
Mukai K, Hosino K, Fujioka T, Testu-to Hagane, 65, 1756 (1979)
Udoguchi T, Kasahara K, Kitagawa M, Tsunenari T, lchihara T, Sakamoto N, Pressure Eng., 19, 169 (1981)
Ryoo DY, Lee SC, Lee YD, Kang JY, J. Kor. Inst. Met. & Meter., 39(12), 1391 (2001)
Lee HM, Bahng GW, Lee JJ, Han JK, Reed RP, J. Kor. Inst. Met. & Meter., 28(7), 567 (1990)
Ogata T, Ishikawa K, Walsh RP, Adv. Cryo. Eng., 34, 233 (1988)
Lee HM, Nahm SH, Huh YH, Lee JJ, Bahng GW, J. Kor. Inst. Met. & Meter., 28(11), 970 (1990)
ASTM Standard E 8 : Annual Book of ASTM Standards, ASTM, 03. 01, p.130, Philadelphia, USA, (1984) (1984)
Dobson WG, Johnson DL, Adv. Cryo. Eng., 30, 185 (1984)
Reed RP, Adv. Cryo. Eng., 7, 448 (1961)
Read DT, Tobler RL, Adv. Cryo. Eng., 28, 17 (1982)
Juhas MC, Duncan DB, Streit RD, Cryogenics, 23, 603 (1983)

[Referenced By]

[Related Articles]

[1] Kim SK, Jang CW, Lee JH, Jung CH, Seo YG, Kang CG, Korean J. Mater. Res., 16(8), 516 (2006)

[2] Nakamura T, Tominaga M, Murase H, Nishiyama Y, Testu-to-Hagane, 69, 471 (1982)

[3] Hoshino K, Mukai K, Testu-to-Hagane, 69, 631 (1983)

[4] Baudrt G, Pineau A, Mater. Sci. Eng. A, 28, 229 (1977)

[5] Suto H, Kaga H, J. Jpan. Inst. Metal, 37, 1158 (1973)

[6] Chanani GR, Antolovich SD, Gerberich WW, Metall. Trans., 3A, 2661 (1972)

[7] Bathias C, Pelloux RM, Metall. Trans., 4A, 1265 (1973)

[8] Antolovich SD, Singh B, Metall. Trans., 2A, 2135 (1971)

[9] Pineau AG, Pelloux RK, Met. Trans., 5, 1103 (1974)

[10] Fukushima E, Goto A, Ito M, Fushimi M, J. Jpan. Inst. Metal, 36, 605 (1972)

[11] Izumi H, Sunada H, Shinoda G, J. Jpan Soc. Strength & Fracture Meter., 14, 173 (1979)

[12] Chanani GR, Antolovich SD, Metall. Trans., 5A, 217 (1974)

[13] Tsuzaki K, Nakanishi E, Maki T, Tamura I, Trans. ISIJ, 23, 834 (1983)

[14] Hennessy D, Steckel G, Altstetter C, Metall Trans., 7A, 415 (1976)

[15] Mukai K, Hosino K, Fujioka T, Testu-to Hagane, 65, 1756 (1979)

[16] Udoguchi T, Kasahara K, Kitagawa M, Tsunenari T, lchihara T, Sakamoto N, Pressure Eng., 19, 169 (1981)

[17] Ryoo DY, Lee SC, Lee YD, Kang JY, J. Kor. Inst. Met. & Meter., 39(12), 1391 (2001)

[18] Lee HM, Bahng GW, Lee JJ, Han JK, Reed RP, J. Kor. Inst. Met. & Meter., 28(7), 567 (1990)

[19] Ogata T, Ishikawa K, Walsh RP, Adv. Cryo. Eng., 34, 233 (1988)

[20] Lee HM, Nahm SH, Huh YH, Lee JJ, Bahng GW, J. Kor. Inst. Met. & Meter., 28(11), 970 (1990)

[21] ASTM Standard E 8 : Annual Book of ASTM Standards, ASTM, 03. 01, p.130, Philadelphia, USA, (1984) (1984)

[22] Dobson WG, Johnson DL, Adv. Cryo. Eng., 30, 185 (1984)

[23] Reed RP, Adv. Cryo. Eng., 7, 448 (1961)

[24] Read DT, Tobler RL, Adv. Cryo. Eng., 28, 17 (1982)

[25] Juhas MC, Duncan DB, Streit RD, Cryogenics, 23, 603 (1983)