스테인레스 스틸 극세사와 Ti 극세사 제조 특성 평가

김태화; 고재황; 이동복; T.H. Kim; J.H. Ko; D.B. Lee

Korean Journal of Materials Research, Vol.15, No.1, 37-41, January, 2005

DOI10.3740/MRSK.2005.15.1.037 Export Citation

스테인레스 스틸 극세사와 Ti 극세사 제조 특성 평가

Characterization of Manufacturing Process of Metal Fibers of Stainless Steel and Titanium

김태화, 고재황, 이동복^†

성균관대학교 금속재료공학부

T.H. Kim, J.H. Ko, and D.B. Lee^†

Dept. of Advanced Materials Engineering, Sungkyunkwan University, 300 Chungchun-dong, Jangan-gu, Suwon, Gyeonggi, 440-746, Korea

E-mail:

Stainless steel fibers with a diameter of 17μm and 630 nm were produced from stainless steel wires by the drawing/annealing/exfolitation process. The suitable sheath material to draw the core stainless steel wires to fibers was the Cu coating. The low melting metal of Zn was not a suitable sheath coating. Also, an attempt was made to produce 20μmΦTi fibers from the core titanium wires. The main obstacles in producing Ti fibers were their resistance to deformation owing to the Ti's hop structure, and high reactivity of Ti with the exfolitation solution.

Keywords:metal fiber;stainless steel;titanium;drawing

[References]

Liu W, Zeng Z, Ming D, J. Mater. Proc. Technol., 142, 562 (2003)
Hochberg A, Versieck J, Plastic Additves & Compounding, 3, 24 (2001)
Jang H, Ko K, Kim SJ, Basch RH, Fash JW, Wear, 256, 406 (2003)
Kim DI, Kim SG, Choi HJ, J. of the Korean Inst. Met. & Mater., 33, 928 (1995)
Hahn YD, Song IH, Bulletin of the Korean Inst. of the Mat. & Mater., 10, 737 (1997)

[1] Liu W, Zeng Z, Ming D, J. Mater. Proc. Technol., 142, 562 (2003)

[2] Hochberg A, Versieck J, Plastic Additves & Compounding, 3, 24 (2001)

[3] Jang H, Ko K, Kim SJ, Basch RH, Fash JW, Wear, 256, 406 (2003)

[4] Kim DI, Kim SG, Choi HJ, J. of the Korean Inst. Met. & Mater., 33, 928 (1995)

[5] Hahn YD, Song IH, Bulletin of the Korean Inst. of the Mat. & Mater., 10, 737 (1997)