진공 Hot Press법에 의한 TiNi/6061Al 지적 복합재료의 확산층 형성거동

박광훈; 박성기; 신순기; 이준희; Kwang-Hoon Park; Sung-Ki Park; Soon-Gi Shin; Jun-Hee Lee

Korean Journal of Materials Research, Vol.12, No.12, 955-961, December, 2002

DOI10.3740/MRSK.2002.12.12.955 Export Citation

진공 Hot Press법에 의한 TiNi/6061Al 지적 복합재료의 확산층 형성거동

Behavior of Diffusion Layer Formation for TiNi/6061Al Smart Composites by Vacuum hot Press

박광훈, 박성기, 신순기, 이준희 ^†

동아대학교 신소형재 가공청정 공정개발 연구센터

Kwang-Hoon Park, Sung-Ki Park, Soon-Gi Shin, and Jun-Hee Lee^†

Center for Advanced Net Shape Manufacturing and Clean Process, Dong-A University, 840, Hadan2-dong, Saha-gu, Busan, 604-714, Korea

E-mail:

2.7vol%TiNi/6061 Al composites with TiNi shape memory alloy as reinforcement were fabricated by vacuum hot press. It was investigated by OM, SEM, EPMA and XRD analysis for the behavior of diffusion layer formation on various heat treatment condition. Thickness of diffusion layer was increased proportionally according to heat treatment time. The layer was formed by the mutual diffusion of TiNi and Al. The diffusion rate from TiNi fiber to Al matrix was faster than that of reverse diffusion path. The more diffused layer was formed in Al matrix. The diffusion at interface layer was consisted of A1 3 Ti, Al 3 Ni analyzed by EPMA, XRD results.

Keywords:Hot Press;TiNi/6061 Al composites;Diffusion layer;microstructures

[References]

Composite materials, Chawla KK, McGraw-Hill, New York (1987) 151-152 (1987)
Mc Danel DL, Metall. Trans., 16A, 105 (1985)
Kang HK, Lee JH, Kim SK, J. KFS, 18(1), 69 (1998)
Lee JC, Kim GH, Lee JI, J. Kor. Inst. Met. Master, 34(1) (1996)
Kim SK, Lee JH, Yun DP, Park YC, Lee GC, J. KFS, 18(6), 534 (1998)
Taya M, Shimamoto A, Furuya Y, Proc. 1CCM-10, Whistler BC, Canada, (1995) p.V275-V282 (1995)
Mizuuchi K, Inoue K, Sugioka M, Itami M, 9th CIMTEC-World Forum on New Materials SymposiumVIII-Smart Materials Systems, ed. By Vincenzini P, pub. Techna. Srl, (1999) p.95 (1999)
Jang DH, Cha DD, Lim SG, J. Kor. Inst. Met. Mater., 35(6), 760 (1997)
Lee JH, Hamada K, Taya M, Inoue K, Park CS, Kim SK, Korean J. Mater. Res., 7(11), 951 (1997)
Hamada K, Lee JH, Mizuuchi K, Taya M, Inoue K, Mater. Trans. A, 1127 (1998)

[Related Articles]

[1] Composite materials, Chawla KK, McGraw-Hill, New York (1987) 151-152 (1987)

[2] Mc Danel DL, Metall. Trans., 16A, 105 (1985)

[3] Kang HK, Lee JH, Kim SK, J. KFS, 18(1), 69 (1998)

[4] Lee JC, Kim GH, Lee JI, J. Kor. Inst. Met. Master, 34(1) (1996)

[5] Kim SK, Lee JH, Yun DP, Park YC, Lee GC, J. KFS, 18(6), 534 (1998)

[6] Taya M, Shimamoto A, Furuya Y, Proc. 1CCM-10, Whistler BC, Canada, (1995) p.V275-V282 (1995)

[7] Mizuuchi K, Inoue K, Sugioka M, Itami M, 9th CIMTEC-World Forum on New Materials SymposiumVIII-Smart Materials Systems, ed. By Vincenzini P, pub. Techna. Srl, (1999) p.95 (1999)

[8] Jang DH, Cha DD, Lim SG, J. Kor. Inst. Met. Mater., 35(6), 760 (1997)

[9] Lee JH, Hamada K, Taya M, Inoue K, Park CS, Kim SK, Korean J. Mater. Res., 7(11), 951 (1997)

[10] Hamada K, Lee JH, Mizuuchi K, Taya M, Inoue K, Mater. Trans. A, 1127 (1998)