양극산화법에 의한 나노와이어 제조I. 알루미나 나노 템플레이트의 특성

조수행; 오한준; 박치선; 장재명; 지충수; S.H. Cho; H.J. Oh; C.S. Park; J.M. Chang; C.S. Chi

Korean Journal of Materials Research, Vol.12, No.2, 121-128, February, 2002

DOI10.3740/MRSK.2002.12.2.121 Export Citation

양극산화법에 의한 나노와이어 제조I. 알루미나 나노 템플레이트의 특성

Preparation of Nano Wire by Anodic Oxidation I. Characteristics of Alumina Nano-Template by Anodic Oxidation

조수행, 오한준 ¹, 박치선², 장재명, 지충수 ^†

국민대학교 금속재료공학부
¹한서대학교 재료공학과
²한서대학교 전자공학과

S.H. Cho, H.J. Oh¹, C.S. Park², J.M. Chang, and C.S. Chi^†

School of Metallurgical and Materials Engineering, Kookmin University, Seoul, 136-702, Korea
¹Dept of Materials Engineering, Hanseo University, Seosan, 352-820, Korea
²Department of Electronic Engineering, Hanseo University, Seosan, 352-820, Korea

E-mail:

Anodic alumina layer can be used as templates for preparation of nano-structured materials, because porous oxide layer on aluminum shows a uniform pore size and a high pore density. In order to find out possibility for template material to prepare nano wire, the effects of the anodic applied potential, anodic time and the temperature of electrolyte on pore diameter of anodic alumina layer were studied using SEM and AFM. The pore diameter of anodic alumina layer increased with applied anodic potential and electrolytic temperature. Especially, the pore diameter of anodic oxide layers formed in chromic acid can be well replicated by widening process in H 3 PO 4 solution.

Keywords:Anodizing;Porous film;Anodic alumina template;Widening process

[References]

Hultten JC, Martine CR, J. Mater. Chem., 7, 1075 (1997)
Martine CR, Chem. Mater., 8, 1739 (1996)
Kawai S, Ueda R, J. Electrochem. Soc., 122, 32 (1975)
Cheng TJ, Jarne J, Gau JS, ibid, 137, 93 (1990)
Cha YF, Ruckenstein J, J. Catal., 55, 281 (1978)
Itaya K, Sugawara S, Arai K, Saito S, J. Chem. Eng. Jpn., 17, 514 (1984)
Yoshino T, Baba N, ibid, 1983, 955 (1983)
Osawa N, Fukuoka K, ibid, 50, 643 (1999)
Matsuzaki T, Yamazaki T, Fljitsu Scientific and Technical J, 6, 45 (1980)
Serbrennikova I, Vanysek P, Birss VI, Electrochim. Acta, 42(1), 146 (1997)
Strijkers GJ, Dalderop JHJ, Broeksteeg MAA, Swagten HM, de Jonge WJM, Appl. Phys. Lett., 73, 1589 (1998)
Sato T, Kaminaga K, Altopia, p57, 1996 (Jan).
Lee KH, J. Kor. Electrochem. Soc., 4, 49 (2001)
Wernick S, Pinner R, Sheasby PG, The Surface Treatment and Finishing of Aluminum and Its ALoys, 5th ed., vol 1. ASM International, Metals Park, OH (1987).

[Referenced By]

[Related Articles]

[1] Hultten JC, Martine CR, J. Mater. Chem., 7, 1075 (1997)

[2] Martine CR, Chem. Mater., 8, 1739 (1996)

[3] Kawai S, Ueda R, J. Electrochem. Soc., 122, 32 (1975)

[4] Cheng TJ, Jarne J, Gau JS, ibid, 137, 93 (1990)

[5] Cha YF, Ruckenstein J, J. Catal., 55, 281 (1978)

[6] Itaya K, Sugawara S, Arai K, Saito S, J. Chem. Eng. Jpn., 17, 514 (1984)

[7] Yoshino T, Baba N, ibid, 1983, 955 (1983)

[8] Osawa N, Fukuoka K, ibid, 50, 643 (1999)

[9] Matsuzaki T, Yamazaki T, Fljitsu Scientific and Technical J, 6, 45 (1980)

[10] Serbrennikova I, Vanysek P, Birss VI, Electrochim. Acta, 42(1), 146 (1997)

[11] Strijkers GJ, Dalderop JHJ, Broeksteeg MAA, Swagten HM, de Jonge WJM, Appl. Phys. Lett., 73, 1589 (1998)

[12] Sato T, Kaminaga K, Altopia, p57, 1996 (Jan).

[13] Lee KH, J. Kor. Electrochem. Soc., 4, 49 (2001)

[14] Wernick S, Pinner R, Sheasby PG, The Surface Treatment and Finishing of Aluminum and Its ALoys, 5th ed., vol 1. ASM International, Metals Park, OH (1987).