Corrosion and fouling have been two major enemies for materials immersed in seawater. Fluid including gas and liquid as coating for marine corrosion protection has attracted much attention, since it can also exert antifouling capability in seawater environment. Combining gas and solid phases, superhydrophobic surface is promising to protect the underlying metal from corrosion. However, the intrinsically short sustainability in underwater environment has hindered its practical application, so that its corrosion protection ability is only temporary. Originated from liquid and solid phases, slippery liquid-infused porous surface (SLIPS) has spurred wide interest due to its prominent performance in different fields. However, the exploration of corrosion protection efficiency from SLIPS remains rare. In this research, SLIPS is constructed onto steel surface via a facile two-step protocol. First, based on a dissolution-deposition strategy, iron tetradecanoate is formed by an electrochemical route. After that, fluid lubricant is infused onto the deposit, whose rough surface acts as the reservoir to entrap the fluid to form a static liquid coating. Compared to the bare and hydrophobic deposit covering low alloy steel, the SLIPS composed perfluorinated lubricant and iron tetradecanoate endows good corrosion protection property. (C) 2014 Elsevier B.V. All rights reserved.