Propylene is one of the most important products in the petrochemical industry, which is used as raw material for a wide variety of products. The propylene/propane separation is a very energy-intensive process because their boiling points are quite similar. In addition, at atmospheric conditions, their boiling points are -47.6 degrees C and -42.1 degrees C, respectively. To separate this mixture conventional columns which operate at high pressure and cryogenic distillation columns which operate at low pressure have been used, however, this approaches are still energy-intensive. This work presents energy-efficient and intensified distillation columns which are adiabatic such as the vapor recompression column (VRC) or diabatic such as columns with heat-integrated stages. A design and optimization procedure, which minimizes the energy consumption in the propylene/propane separation is presented. Conceptual design, superstructure representation, rigorous simulations and mathematical programming techniques are effectively combined to assess all the candidate distillation structures, refrigeration cycles, and heat integration possibilities simultaneously. Results showed that VRC and diabatic distillation columns with heat-integrated stages can reduce the energy consumption between 58 and 75% when compared with conventional distillation at high pressure. Furthermore, the proposed synthesis procedure derived simplified optimal distillation structures with few heat-integrated stages and still attained important energy savings. (C) 2014 Elsevier B.V. All rights reserved.