양극산화법에 의한 나노와이어 제조 II. 알루미나 템플레이트를 이용한 나노와이어 제조

조수행; 오한준; 박치선; 장재명; 조남돈; 지충수; S.H. Cho; H.J. Oh; C.S. Park; J.M. Chang; N.D. Cho; C.S. Chi

Korean Journal of Materials Research, Vol.12, No.1, 89-93, January, 2002

DOI10.3740/MRSK.2002.12.1.089 Export Citation

양극산화법에 의한 나노와이어 제조 II. 알루미나 템플레이트를 이용한 나노와이어 제조

Preparation of Nano Wire by Anodic Oxidation II. Production of Nano Wire Using Anodic Alumina Template

조수행, 오한준 ¹, 박치선², 장재명, 조남돈 , 지충수 ^†

국민대학교 금속재료공학부
¹한서대학교 재료공학과
²한서대학교 전자공학과

S.H. Cho, H.J. Oh¹, C.S. Park², J.M. Chang, N.D. Cho , and C.S. Chi^†

School of Metallurgical and Materials Engineering, Kookmin University, Seoul, 136-702, Korea
¹Dept. of Materials Engineering, Hanseo Univeristy, Seosan, 352-820, Korea
²Dept. of Electronic Engineering, Hanseo University, Seosan, 352-820, Korea

E-mail:

To investigate the effect of properties of pores in anodic alumina template(AAT) on the formation and characteristics of metal nano wires, Cu and Ni nano wires were manufactured using anodic alumina template formed in various electrolytes. The characteristics of prepared metal nano wires using AAT could be replicated from those of pores in AAT. The diameters of nano wires could be controlled by the widening process of anodic porous film in H 3 PO 4 solution. The shape ratio of the nano wire was shown to be 170±30 for Ni nano wire formed by AAT made in sulfuric acid.

Keywords:Ni nano wire;Cu nano wire;Anodic alumina template;Widening process

[References]

Searson PC, Morffat TP, Crit. Rev. Surf. Chem., 3, 171 (1994)
Martin C, Science, 266, 365 (1994)
Lee KH, J. Kor. Electrochem. Soc., 4(2), 49 (2001)
Nagayama M, Tamura K, Takasashi H, Corros. Sci., 12, 133 (1978)
Xu D, Xu Y, Chem. Phys. Lett., 325, 341 (2000)
Park GS, Bull. Kor. lnst. of Met. Mat., 9(6), 589 (1996)
Sato T, Kaminaga K, Altopia, 57 (1996)
Wernick S, Pinner R, 'Surface Treatment and Finishing of Aluminum', 3rd Ed., Robert Draper Ltd., Trowbridge, England, 260-269 (1964) (1964)
Li L, Solar Energy Materals & Solar Cells, 64, 286 (2000)
Serbrennikova I, Vanysek P, Birss VI, Electrochim. Acta, 42, 146 (1997)

[Related Articles]

[1] Searson PC, Morffat TP, Crit. Rev. Surf. Chem., 3, 171 (1994)

[2] Martin C, Science, 266, 365 (1994)

[3] Lee KH, J. Kor. Electrochem. Soc., 4(2), 49 (2001)

[4] Nagayama M, Tamura K, Takasashi H, Corros. Sci., 12, 133 (1978)

[5] Xu D, Xu Y, Chem. Phys. Lett., 325, 341 (2000)

[6] Park GS, Bull. Kor. lnst. of Met. Mat., 9(6), 589 (1996)

[7] Sato T, Kaminaga K, Altopia, 57 (1996)

[8] Wernick S, Pinner R, 'Surface Treatment and Finishing of Aluminum', 3rd Ed., Robert Draper Ltd., Trowbridge, England, 260-269 (1964) (1964)

[9] Li L, Solar Energy Materals & Solar Cells, 64, 286 (2000)

[10] Serbrennikova I, Vanysek P, Birss VI, Electrochim. Acta, 42, 146 (1997)