Metal hydride material properties required for on-board hydrogen storage for use with automotive polymer electrolyte fuel cell systems are discussed. Thermodynamic relationships between enthalpy and entropy of sorption are determined such that the storage system can be thermally integrated with the fuel cell system and be refueled at reasonable H-2 supply pressures of 50-200 atm. Simple criteria are developed for specifying minimum discharge kinetic rates needed to satisfy hydrogen demand on automotive duty cycles. Simple criteria are also developed for specifying minimum charge kinetic rates needed to refuel metal hydride tanks in reasonable time. Accessible intrinsic capacity and bulk density of the metal hydride are determined for the storage system to achieve system level targets for gravimetric and volumetric capacities. Based on these analyses, it is recommended that the storage media properties be measured on samples prepared by mixing the metal hydride with a high thermal conductivity material, and compacted to 600 kg m(-3) bulk density. The compact should have a minimum effective thermal conductivity of 8.5 W m(-1) K-1. Copyright (C) 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.