Six different biomass fuel types (wood pellets, sunflower stalk pellets, straw pellets, buckwheat shells, mixed biomass waste pellets, and grain screenings) and wastewater sludge pellets were burned under controlled conditions to determine the effect of the biomass type on the emitted particulate matter mass and stable carbon isotope composition of bulk and size-segregated particles. Aerosol particles were sampled using the total suspended particle (TSP) sampler and a micro-orifice uniform deposit impactor (MOUDI). The results demonstrated that particle emissions were dominated by the submicron particles (size <1 mu m) in all biomass types. However, significant differences in emissions of submicron particles and their dominant sizes were found between different biomass fuels. The isotOpic fractionation between aerosol particles and original biomass material varied from -0.94 +/- 0.23 parts per thousand to 1.12 +/- 0.16 parts per thousand. The largest negative fractionation -0.94 +/- 0.23 parts per thousand was obtained for the wood pellet fuel type while the largest positive isotopic fractionation (1.12 +/- 0.16 parts per thousand) was observed during the grain screenings combustion. The carbon isotope composition of MOUDI samples compared very well with the isotope composition of TSP samples indicating consistency of the results. The measurements of the stable carbon isotope ratio in size-segregated aerosol particles suggested that combustion processes could strongly affect isotopic fractionation in aerosol particles of different sizes thereby potentially affecting an interpretation of ambient atmospheric observations. (C) 2014 Elsevier Ltd. All rights reserved.