The influence of artificial starvation effects during automotive-related operating conditions is investigated within a polymer electrolyte fuel cell (PEFC) using non-dispersive infrared sensors and a current scan shunt. Driving cycles (DC) and single load change experiments are performed with specific fuel and oxidant starvation conditions. Within the DC experiments, a maximal CO2 amount of 4.67 mu mol per cycle is detected in the cathode and 0.97 mu mol per cycle in the anode exhaust without reaching fuel starvation conditions during the DC. Massive cell reversal conditions occur within the single load change experiments as a result of anodic fuel starvation. As soon as a fuel starvation appears, the emitted CO2 increases exponentially in the anode and cathode exhaust. A maximal CO2 amount of 143.8 mu mol CO2 on the anode side and 5.8 mu mol CO2 on the cathode side is detected in the exhaust gases. The critical cell reversal conditions only occur by using hydrogen reformate as anode reactant. The influence of the starvation effects on the PEFC performance is investigated via polarization curves, cyclic and linear sweep voltammetry as well as electrochemical impedance spectroscopy. The PEFC performance is reduced by 47% as a consequence of the dynamic operation. (C) 2014 Elsevier B.V. All rights reserved.