Synchrotron based X-ray tomographic microscopy (XTM) is used for imaging and quantifying the redistribution of phosphoric acid (PA) in high temperature polymer electrolyte fuel cells (HT-PEFC) in-operando. The main focus of this work is the redistribution of phosphoric acid under dynamic load conditions. Therefore, two different load cycling protocols were applied and the transient redistribution within the fuel cell components was imaged. XTM, for the first time, revealed that the examined PBI based membrane system exhibits extensive electrolyte migration from cathode to anode under high current density operation. PA flooding of anode gas diffusion layer (GDL) and flow field channels occurred. Implications for technical applications and fuel cell degradation are discussed. Quantification of the migrated electrolyte is made by correlating in-operando grayscale values to ex-situ reference samples. (C) The Author(s) 2015. Published by ECS. This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 License (CC BY, http://creativecommons.org/licenses/by/4.0/), which permits unrestricted reuse of the work in any medium, provided the original work is properly cited. All rights reserved.