One-dimensional molybdenum trioxide nanostructures were prepared in three different approaches, including thermal, microwave, and sonochemical methods. The physicochemical properties of the obtained MoO3 nanoparticles were investigated by diffused reflectance spectroscopy, X-ray diffraction analysis, field emission scanning electron microscopy, high resolution transmission electron microscopy, and Brunauer-Emmett-Teller surface area analysis. Among the methods as investigated, sonochemical synthesis gave well-dispersed fine MoO3 nanoparticles compared with the other approaches. All the synthesized MoO3 nanostructures were examined for the catalytic ozonation to degrade azo dye in aqueous environment. Different performances were obtained for the catalyst prepared in different methods and the catalytic efficiencies were found to be-the order of sonochemical, microwave, and then thermal methods. The sonochemical MoO3 catalyst allowed the total dye removal within 20 min and its good performance was justified according to their-higher surface area with higher number of active sites that provide effective dye interaction for better degradation. (C) 2014 Elsevier Ltd. All rights reserved.