Within an integrated steelworks, iron ore sinter making is an energy intensive process. In recent years, biomass is becoming an attractive alternative source of energy to traditional fossil fuels such as coal. In this study, commercially available biomass materials suited to sinter making have been identified as an alternative source of fuel to coke breeze. Olive residues, sunflower husk pellets, almond shells, hazelnut shells and Bagasse pellets have been characterised and prepared for sintering. A laboratory sinter pot has been employed for studying sintering behaviour of biomass material. On average, the calorific values of selected biomass materials, on a dry basis, are about 65% of dry coke breeze. It was found that less of this energy would be available in sinter making due to the evaporation of some of the volatile matter ahead of the flame front. At a replacement rate of 25%, the crushed sunflower husk pellets showed the closest thermal profile to that of coke breeze alone in the size range of -0.8 to +0.6 mm. A specification of less than 1 mm has been recommended for the studied biomass materials when co-firing biomass with coke breeze for iron ore sintering. (C) 2010 Elsevier Ltd. All rights reserved.