Korean Journal of Materials Research, Vol.9, No.8, 843-848, August, 1999
Al 첨가에 따른 소성중 쉘 몰드의 뮬라이트화 거동
Effect of Al addition on Mullitization Behavior of Shell Mold during Sintering
초록
A1 분말의 첨가량을 변화시킨 알루미나 쉘 몰드를 제조하여 소성조건에 따른 알루미나/실리카의 뮬라이트화 거동을 관찰하였다. 알루미나/실리카의 뮬라이트화 반응은 소성온도 및 A1 함량의 증가에 따라 증대함을 알 수 있었으나 쉘 몰드의 상온강도는 감소하였다. 각 소성조건에서 측정된 쉘 강도는 2.0~2.6kg/ mm 2 임을 알 수 있었다. Al의 첨가는 고온에서 쉘 몰드의 변형을 억제시켰다. 특히 2.5wt%%의 Al을 첨가한 후 1000 ? C 에서 1시간 유지한 시편에서는 변형이 일어나지 않았으며, 또한 Al을 첨가하지 않은 시편을 1500 ? C 에서 4시간동안 소성한 시편에서도 변형이 일어나지 않음을 알 수 있었다.
The efect of A1 addition and sintering condition on mutization behavior between alumina and silica in alumina-based shell mold was investigated. A1 addition and high sintering temperature increased the degree of mullitization between alumina/silica but decreased the room temperature strentgh of the shell molds. It was identified that the sintered strength of the shell molds was in range of 2.0~2.6kg/ mm 2 . Al addition suppressed deflection of the shell molds at high temperature. Especially, no deflection was observed in the specimen which was sintered at 1000 ? C for 1hr with 2.5wt% Al. The specimen sintered at 1500 ? C for 4hrs with no Al addition also displayed no deflection.
- Hart LD, American Ceramic Society, 511 (1990)
- Aksay IA, Mangles JA(ed.), Am. Cera. Soc., 94 (1984)
- Lange FF, J. Am. Cera. Soc., 72(1), 3 (1989)
- Sacks MD, Hench LL(ed.), Ulrich DR(ed.), Science of Ceramic Chemical Processing, 522 (1986)
- Hunter RJ, Zeta Potential in Colloid Science (1981)
- Egashira M, Shimizu Y, Takao Y, Yamaguchi R, Ishikawa Y, J. Am. Cera. Soc., 77(7), 1793 (1994)
- Paik U, Hackley VA, Choi S, Jung Y, Colloids Surf. A. (1998)
- O'Brien RW, Midmore BR, Lamb A, Hunter RJ, Disc. Faraday Soc., 90, 301 (1990)
- Vaughn WL, J. Am. Ceram. Soc., 73(6), 1540 (1990)
- Wu S, et al., J. Am. Ceram. Soc., 76(3), 1970 (1993)
- Holz D, et al., J. Am. Ceram. Soc., 77(10), 2509 (1994)
- Cahn RW, Bloor D(ed.), Brook RJ(ed.), et al., The Encyclopedia of Advanced Materials, 2, 1211