화학공학소재연구정보센터
Journal of Industrial and Engineering Chemistry, Vol.32, 327-331, December, 2015
Flash point for binary mixtures of methylcyclohexane, n-heptane and p-xylene
E-mail:
Flammable substances are used in laboratories and industrial process. Flash point is one of the most important physical properties used to determine the potential for the characterize fire and explosion hazard of liquids. The flash point data at 101.3 kPa were measured for the binary systems {methylcyclohexane (MCH) + n-heptane}, {MCH + p-xylene} and {n-heptane + p-xylene}. Experiments were performed according to the standard test method (ASTM D 3278) using a SETA closed cup flash point tester. The measured flash point data were compared with predicted values by activity coefficient models: Wilson, Non-Random Two Liquid and UNIversal QUAsiChemical.
  1. Lawrence F, Chemicals Used in the Rubber Industry, Springer, Berlin/Heidelberg, 1990p. 45.
  2. Manuel HJ, Dierkes W, Rapra Rev. Rep. Recycl Rubber, 9, 99 (1997)
  3. Locating and Estimating Air Emissions from Sources of Xylene, EPA-454-R-93-048 (1994).
  4. Gahlyan S, Rani M, Maken S, Kwonc H, Tak K, Moon I, J. Ind. Eng. Chem., 23, 299 (2015)
  5. Crowl DA, Louvar JF, Chemical Process Safety, Prentice Hall, Englewood Cliffs, N.Y., 1990.
  6. Carareto NDD, Kimura CYCS, Oliveira EC, Costa MC, Meirelles AJA, Fuel, 96(1), 319 (2012)
  7. Hristova M, Central Eur. J. Chem., 11, 57 (2013)
  8. Liaw HJ, Tang CL, Lai JS, Fluid Phase Equilib., 300, 68 (2010)
  9. Lees FP, Loss Prevention in the Process Industries, Butterworth-Heinemann, Oxford, UK, 1996.
  10. Wilson GM, Deal CH, Ind. Eng. Chem. Fundam., 1, 20 (1962)
  11. Renon H, Prausnitz JM, AIChE J., 14, 135 (1968)
  12. Abrams DS, Prausnitz JM, AIChE J., 21, 116 (1975)
  13. Dortmund Data Bank Software Package (DDBSP), version 2006 professional, Software and Separation Technology GmbH (http://www.ddbst.de).
  14. National Fire Protection Association, Batterymarch Park, Quincy, MA. National Fire Codes, 7 (1985).
  15. American Society for Testing Materials, Annual Book of ASTM Standards, 6 (1999).
  16. Chatelier HL, Ann. Mines, 19, 388 (1891)
  17. Liaw HJ, Tang CL, Lai JS, Combust. Flame, 138(4), 308 (2004)
  18. Poling BE, Prausnitz JM, O’connell JP, The Properties of Gases and Liquids, 5th edition, McGraw-Hill, New York, 2001.
  19. Ozalp AA, Ozalp U, Ediz B, Commun. Fac. Sci. Univ. Ank. Series B, 45, 49 (1999)
  20. Sanchez-Russinyol MD, Aucejo A, Loras S, J. Chem. Eng. Data, 49(5), 1258 (2004)
  21. Diaz C, Tojo J, J. Chem. Thermodyn., 34(12), 1975 (2002)