Increasing the concentration ratio of parabolic troughs is one of the challenges to make this technology economically competitive against fossil fuels. Parabolic troughs with large concentration ratios face several problems such as difficulty capturing all the solar direct radiation and structural issues associated with thermal expansions and wind resistance amongst others. For larger mirrors it may be necessary to use a bigger absorber in order to capture all the radiation, thus increasing the thermal losses. A second stage reflector helps to increase the concentration ratio without increasing the primary mirror size. In this work, a theoretical analysis of a parabolic trough with a secondary flat reflector is developed and ray tracing is conducted in order to validate the equations obtained. A flat reflector will have a minimal economic impact in the cost of a parabolic trough and it allows larger concentration ratios for identical primary mirror areas compared to a standard parabolic trough. Increases of concentration ratio up to 80% are observed when a secondary flat reflector is inserted in a commercial system, while the shadow area introduced in the primary mirror is usually less than 15% of the primary mirror area. The increase in pumping power is offset by the increase in system efficiency. (C) 2015 Elsevier Ltd. All rights reserved.