Gallium antimonide (GaSb) is the basis of the most photovoltaic and thermophotovoltaic (TPV) systems and its innovative technological aspects based on modern ultra-high vacuum techniques are in trend for device achievement. The real surface of GaSb is modified by technological processes that can conduce to problems related to the reproducible control of its surface properties. The GaSb surface is reactive in atmosphere due to oxygen presence and exhibits a native oxide layer. The evolution of native oxides during the ion sputtering, chemical etching and thermal annealing processes for preparing the surface is presented in detailed way. Ratios of surface constituents are obtained by Angle Resolved X-ray Photoelectron Spectroscopy (ARXPS). Moreover, Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS), Atomic Force Microscopy (AFM) and Low-Energy Electron Diffraction (LEED) are used for characterization. The surface stoichiometry is changed using a specific etchant (e.g. citric acid) at different etching time and is analyzed by ARXPS, SEM, EDS and AFM methods. The experimental results provide useful information regarding surface native oxides characteristics on n-GaSb(100) to be taken into account for development of low resistance contacts for TPV devices based on GaSb alloy. (C) 2015 Elsevier B.V. All rights reserved.