Here we present a novel way to grow aluminum alkoxide films with tunable conductivity with molecular level accuracy with the use of molecular layer deposition (MLD). Alternating exposures of trimethylaluminum (TMA), ethylene glycol (EG), and terephthaloyl chloride (TC) are used to grow the aluminium alkoxide films. Control over film composition was accomplished by alternating cycles of EG and TC between cycles of TMA and EG. In this fashion the aluminum to carbon ratio can be accurately controlled. These films were then pyrolyzed under a reducing atmosphere to yield a conductive Al2O3/carbon composite. Raman spectroscopy determined that nanocrystalline sp2-graphitic carbon was formed following pyrolysis while sheet resistance measurements determined that conductivity of the film is directly related to aluminium-carbon ratio. To further elucidate the origin of conductivity within the film, synchrotron based XPS was performed. (C) 2015 Elsevier B.V. All rights reserved.