The chemical-structural properties of four South African bituminous coals were investigated using wide angle X-ray diffraction-carbon fraction analysis (WAXRD-CFA), attenuated total reflection Fourier transform infra-red spectroscopy (ATR-FTIR), solid state C-13 nuclear magnetic resonance spectroscopy (ss C-13 NMR), and high resolution transmission electron microscopy (HRTEM). The aromaticity of the samples determined by solid state C-13 NMR ranged from 0.74 to 0.87 and compared well with the WAXRD-CFA results (0.73-0.86). WAXRD-CFA, ATR-FTIR and C-13 NMR data showed that the lower iso-rank coal samples contained more aliphatic moieties; while the higher rank sample contained higher fractions of polyaromatic moieties and saturated long chain hydrocarbons. The lattice parameters determined from WAXRD-CFA show that lower rank coals investigated are structurally less well-ordered than the higher rank coal. Also, its fringes were quantified as having the greatest preferential alignment of the coals examined. HRTEM aromatic fringe image analysis revealed that the carbon lattice of the samples consist of aromatic fringes of varying lengths, L (3 angstrom <= L <= 95 angstrom), which corresponded to a molecular weight distribution ranging from 75 to 1925 amu, assuming circular catenation. The coal with the highest volatile matter yield was found to exhibit a higher frequency of lower molecular weight fringes; while the higher rank coal possessed the most higher molecular weight fringes. The average molecular weights determined for the samples from 13C NMR varied between 504 and 544 amu; and compared well with the values from HRTEM aromatic fringe image analysis data. Thus, there was good agreement and consistency between the different techniques. It was demonstrated that, for the characterisation methods used in this study; that vitrinite reflectance impacts more on the chemical-structural properties of these coals than maceral composition does. (C) 2015 Elsevier Ltd. All rights reserved.