In this study, carbon nanotube (CNT) film anodes are prepared for use in flexible lithium ion batteries, and the electrochemical performance of the CNT film anodes is evaluated. The CNT films are synthesized via chemical vapor deposition and direct spinning. The films are heat-treated under a nitrogen atmosphere at a high temperature to study the effects of heat treatment on the battery performance. The electrodes made with the CNT films are characterized via charge discharge test, cyclic voltammetry, and impedance measurement. The results indicate that batteries with films heat-treated under a nitrogen atmosphere show a higher capacity, which can be a result of their high crystalline perfection. The impedance analysis shows that a lower resistance at the interface can be obtained by using heat-treated films. The charge discharge tests are carried out by adjusting the rate from C/2 to 10C, and when the rate slows from 10C to 1C, the capacity of the samples largely recovers. The nitrogen/heat-treated CNT film electrodes present a capacity that is twice as high, such as 2C, 5C, and 10C, than untreated CNT film electrodes. These results indicate that the carbon nanotube film anodes have high potential for use in portable and wearable computers due to their flexibility. (C) 2015 Elsevier B.V. All rights reserved.