Liberating useful materials from printed circuit boards (PCBs) is challenging because PCBs are flexible and complex in terms of materials and components. In this study, the crushing of PCBs at low-temperature was investigated. The results indicated that when the temperature was decreased to approximately -20 degrees C, the strength of PCBs decreased and their brittleness increased, making them easier to crush. A double roll crusher was selected to crush the PCBs. The particle size distribution and power consumption were studied under different working conditions. The results showed that the particle size of most of the lumps was in the range 15 x 20-25 x 20 mm, and that power consumption was minimal when the frequency of the crusher was 40-50 Hz. A small shredder was used for cryogenic grinding, and it was found that its power consumption strongly depended on the cooling temperature. An orthogonal experiment was conducted, which revealed that a smaller cutter gap and higher rotational speed could achieve higher yield. Furthermore, the results indicated that the air table developed to liberate PCB materials could effectively separate 2.8-0.5 mm grade materials. Overall, the results of this study provide an experimental foundation for more effectively recycling discarded PCBs. (C) 2016 Elsevier B.V. All rights reserved.