Performances of batch mode solid state anaerobic digestion ( SSAD) were investigated through several leachate recirculation strategies. Three parameters were shown to particularly influence methane production rates ( MPR) and methane yields: the length of the interval between two recirculation events, the leachate to substrate ( L:S) ratio and the volume of leachate recirculated. A central composite factor design was used to determine the influence of each parameter on methane production. Results showed that lengthening the interval between two recirculation events reduced methane yield. This effect can be counteracted by recirculating a large volume of leachate at a low L: S ratio. Steady methane production can be obtained by recirculating small amounts of leachate, and by lengthening the interval between two recirculations, regardless of the L: S ratio. However, several combinations of these parameters led to similar performances meaning that leachate recirculation practices can be modified as required by the specific constraints SSAD plants configurations. (C) 2016 Elsevier Ltd. All rights reserved.