We first report the fabrication of all one dimensional (1D) active materials based Li-ion power packs using conversion type anode (alpha-Fe2O3). Electrospining procedure has been used to prepare all the 1D nanostructures. Half-cell studies are performed with metallic Li to ascertain the electrochemical activity of the individual components. In order to overcome irreversible capacity loss (ICL) in alpha-Fe2O3, the high voltage cathode has been over lithiated electrochemically (Li1.33Ni0.5Mn1.5O4) prior to the full-cell assembly. The combined advantages of 1D nanostructure and a new over lithiation concept certainly provides the less amount of active material loading to mitigate ICL. On the other hand, all based cell Li1.33Ni0.5Mn1.5O4/1 M LiPF6 gelled PVdF-HFP/alpha-Fe2O3 delivered an energy density of similar to 193 Wh kg(-1) with working potential of similar to 3.27 V and rendered similar to 88% of initial reversible capacity after 60 cycles. (C) 2016 Elsevier Ltd. All rights reserved.