We investigate the structural and magnetic properties of Ni78Fe22 thin films sandwiched between low softening-point (LSP) glasses, which can be used in spin quantum cross (SQC) devices utilizing stray magnetic fields generated from magnetic thin-film edges. We also calculate the stray magnetic field generated between the two edges of Ni78Fe22 thin-film electrodes in SQC devices and discuss the applicability to spin-filter devices. Using the established fabrication technique, we successfully demonstrate the formation of LSP-glass/Ni78Fe22/LSP-glass structures with smooth and clear interfaces. The coercivity of the Ni78Fe22 thin films is enhanced from 0.9 to 103 Oe by increasing the applied pressure from 0 to 1.0 MPa in the thermal pressing process. According to the random anisotropy model, the enhancement of the coercivity is attributed to the increase in the crystal grain size. The stray magnetic field is also uniformly generated from the Ni78Fe22 thin-film edge in the direction perpendicular to the cross section of the LSP-glass/Ni78Fe22/LSP-glass structures. Theoretical calculation reveals that a high stray field of approximately 5 kOe is generated when the distance between two edges of the Ni78Fe22 thin-film electrodes is less than 5 nm and the thickness of Ni78Fe22 is greater than 20 nm. These experimental and calculation results indicate that Ni78Fe22 thin films sandwiched between LSP glasses are useful as electrodes for SQC devices, serving as spin-filter devices. (C) 2016 Elsevier B.V. All rights reserved.