Hybrid nanocomposites based on Cu-BTC MOF, graphene oxide (GO), carbon nanotubes (CNTs), and Fe3O4 magnetic nanoparticles (MNPs) were developed via a simple green solvothermal method, at which GO and 'CNT were used as platforms to load nanostructured Cu-BTC MOF and Fe3O4 MNPs. The as synthesized hybrid nanocomposites were characterized by XRD, SEM, TEM, XPS, IR, Raman, TGA, and BET techniques. XRD measurements show highly crystalline structures for the prepared hybrid nanocomposites. Morphological analyses carried out by SEM and TEM also confirm successful growth of Fe3O4 MNPs and nanoparticulate Cu-BTC MOF over the carbon-based platforms. Chemical, elemental, and TGA analyses verify chemical bonding and successful compositing of the parent materials. Nitrogen isotherms show a cumulative pore volume of 0.360 cm(3) g(-1) for the hybrid nanocomposite of Fe3O4/Cu-BTC@GO compared to 0.030 cm(3) g(-1), of the sole Cu-BTC MOF, which suggests potential uses towards small molecule adsorption. We have found that use of GO and CNT substrates (i) diminish the aggregation and increases dispersive forces within the MOFs, (ii) lead to MOFs with different morphology and size, and (iii) result in formation of small pores between the MOF and the platforms. Adsorption capacity of the prepared nanomaterials was examined over methylene blue (MB) as a model organic pollutant. The developed hybrid nanomaterials show enhanced pollutant adsorption capacity compared to that of the parent materials. The improved adsorption capacity is attributed to the synergetic effect of covalent bonding between the parent materials as well as to the unique. features of the nanoscale MOF. Overall, these novel materials may be considered as excellent candidates towards a variety of environmental applications such as water remediation. (C) 2016 Published by Elsevier B.V.