International Journal of Hydrogen Energy, Vol.41, No.36, 16070-16076, 2016
Investigation on linear description of the char conversion for the process of supercritical water gasification of Yimin lignite
Lignite gasification in supercritical water has been proved an efficient and clean utilization because of high gas yields. Char conversion process is the rate-determining step for lignite gasification in supercritical water, therefore, the accurate description of the conversion process is of great importance for the reaction optimization. Special attention was paid on the progress of char conversion in the process of lignite gasification. Quartz tube reactor was employed to avoid undesired catalytic effect of the reactor wall and Yimin lignite was choose as feedstock. The experiments were conducted with the operating range of temperature 650-850 degrees C with 5%-25% concentration. To improve accuracy of kinetic models, volatile and fixed carbon conversion was treated individually. Lignite conversion was simulated by random pore model, non-reacted core model and homogeneous model respectively and volatile process was expressed as a modification based on the data obtained by thermogravimetric analysis. The calculation results showed that the model with non-reacted core model fit coal gasification in supercritical water best and the average error was 3.18%. (C) 2016 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Keywords:Random pore model;Non-reacted core model;Coal gasification;Hydrogen production;Supercritical water