This paper discusses the feasibility of a novel adiabatic magnesium hydride (MgH2) reactor concept based on thermochemical heat storage. In such a concept, the heat of reaction released during the absorption of hydrogen is stored by a thermochemical material in order to be reused in a subsequent desorption stage. Magnesium hydroxide (Mg(OH)(2)) has been selected as the suitable material for integration into the MgH2 storage system due to its thermodynamic properties. An analytical formulation of hydrogen absorption time is used to determine the range of the geometrical characteristics of the two storage media, their properties and their operating conditions. The advantage of the proposed new concept is the possibility to reduce the mass of the heat storage media by a factor of 4 compared to phase change material, improving then the gravimetric system capacity as well as its total cost. The second advantage is an improved flexibility of the operating pressure conditions for MgH2 absorption reaction and Mg(OH)(2) dehydration reaction that enables shorter hydrogen absorption times by ensuring larger temperature gradients between the two storage media. (C) 2016 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.