When producing mono-axially stretched films made of amorphous polycarbonate, a self-reinforcement is generated due to the stretching process. This leads to an increase of the strength and stiffness. The mono-axial stretching process is conducted at temperatures above the glass transition temperature, whereas better mechanical properties are obtained at higher stretching temperatures. However, the film tends to adhere to the rolls, especially at temperatures from 10 degrees C above the glass transition temperature. The rolls of the mono-axial stretching unit are made of an induction hardened and polished quenched and tempered steel 1.7225 - 42CrMo4. This work reports on the investigation of the detachment behavior of polycarbonate on different coatings as a function of the temperature and contact time. The main intention is to find a suitable coating on which the polycarbonate film adheres only slightly at temperatures clearly exceeding the glass transition temperature. POLYM. ENG. SCI., 56:786-797, 2016. (c) 2016 Society of Plastics Engineers