Nanoscale zero-valent iron (nZVI) and nickel/nanoscale zero-valent iron (Ni/nZVI) bimetallic particles were explored for tetrabromobisphenol A (TBBPA) and tetrachlorobisphenol A (TCBPA) dehalogenation under ambient condition. The characteristics of the fresh and aged nanoparticles were analyzed by SEM, BET, XRD, XPS and FTIR, and found out that bimetal nanoparticles accelerated the corrosion of Fe in the synthesized particles during the reaction. The results shows that the addition of Ni to nZVI particles with low Ni loading (0.5 wt%) significantly enhanced dehalogenation of TBBPA and TCBPA compared to the pure nZVI, while high Ni loading (>0.5 wt%) did less favor. The observed pseudo first order rate constant (k(obs)) of 0.5%Ni/nZVI for TBBPA and TCBPA were 3.74 ( 0.29) x 10(-2) and 0.95 (+/-0.04) x 10(-2) min(-1), which were about 27 and 20 times higher than that of nZVI, respectively, probably due to the formation of highly activated hydrogen atom (H*) and galvanic cells. Ni/nZVI with lower Ni loading (<0.5 wt%) resulted in partial dehalogenation of TBBPA and TCBPA, while with higher Ni loading (>= 0.5 wt%) curtailed the accumulation of intermediates and completely transformed them to bisphenol A (BPA). A dramatic decrease in oxidation-reduction potential (ORP) values from about +300 to -750 mV after Ni/nZVI addition indicates that Ni/nZVI is an effective material to achieve highly reducing conditions. Both ORP and pH shows a correlative tendency with TBBPA and TCBPA removal efficiency. This suggests that ORP and pH can serve as indicators for the reductant reactivity. (C) 2016 Elsevier B.V. All rights reserved.