Matured reservoirs are being targeted for enhanced oil recovery (EOR) operations in the hope to recover the residual oil that remains trapped within the porous media. Chemical enhanced oil recovery is one of the successful oil recovery methods which is being employed for the recovery of the residual oil. Many of the conventional chemicals fail to perform under high temperature and high saline reservoir conditions. These situations lead to the search for alternate flooding techniques which could efficiently produce the crude oil to the surface. The present work investigates a possible solution for the recovery of trapped crude oil using lactam and imidazolium based ionic liquids (ILs) specifically targeted towards recovery in high saline environment. Initially, the interfacial tension of the crude oil-water system has been investigated using various chemical agents, such as sodium dodecyl sulfate (SDS), and six different ILs at varying high saline concentrations as a function of temperature (283.15-353.15 K). Subsequently, flooding experiments with only polymer, only SDS, only IL, SDS + polymer and IL + polymer at zero and high saline conditions were performed. It was observed that the IL + polymer flood performed very well in both zero and high salinity conditions as compared to all other flooding systems. The present investigation also portrays an intuition on the evaluation of ILs based on their alkyl chain length. (C) 2016 Elsevier Ltd. All rights reserved.