Jet electrochemical machining is a promising shaping method that has the potential to replace traditional sinking ECM in the industry owing to its flexibility and stability. However, its machining quality is impaired by the occurrence of a unique phenomenon (i.e., the anode cannot be uniformly dissolved with high nozzle travel rate). This paper aims to analyze this unique phenomenon from the viewpoint of anodic behavior and to select the optimum travel rate parameter window. The anodic behavior of TB6 titanium alloy in sodium chloride solution was investigated by linear sweep voltammetry, cyclic voltammetry, electrochemical impedance spectroscopy and chronoamperometry. A time-dependent mechanism of pitting/large localized corrosion/polishing for the anodic interface structure was developed. The full electricity quantity of the equivalent oxide layer capacitor, Q, was proposed as a criterion for the initiation of uniform dissolution state. Subsequently, a novel model that incorporates the parameter Q was developed to account for the effect of anodic behavior. This model is able to predict the machined profile as well as the localized corrosion range. Finally, the effect of nozzle travel rate on jet ECM performance was investigated, and a nozzle travel rate of 10 to 25 mu m s(-1) was selected as the optimum parameter window in the present work. (C) 2017 Elsevier Ltd. All rights reserved.