Energy & Fuels, Vol.31, No.2, 1529-1535, 2017
Waterflood Oil Recovery from Mixed-Wet Limestone: Dependence upon the Contact Angle
Remaining oil saturation established by waterflooding from maximum initial oil saturation was measured in Indiana limestone under four mixed-wet conditions established using different organic acids. The altered wettability is characterized by the advancing contact angle of the aqueous phase on a calcite substrate submerged in the oil phase, which ranged from theta(degrees) = 50 degrees to 150 degrees. Remaining oil saturation decayed as a power of time for up to 55 pore volumes, of water injected and then reached a constant value. The duration of oil production increased linearly with theta(degrees). In contrast, remaining oil saturation decreased and then increased with increasing theta(degrees) within the range of experimental conditions, with optimal wettability for recovery shifting from theta(degrees) = 1109 to 135 as waterflood progressed.