In this paper, Canadian ilmenite ore-based oxygen carriers (OCs) were, for the first time, prepared by coating the ilmenite ore particles with metal oxides of CeO2, ZrO2, NiO, or Mn2O3 by using precursors of Ce(NO3)(3), Zr (O-t-Bu)(4), Ni(NO3)(2) or Mn(NO3)(2), respectively. The reduction reactivity of OCs with methane was examined by temperature-programmed methane reduction (CH4-TPR), and their cyclic performance during the chemical looping methane combustion was investigated isothermally in a thermogravimetric analyzer (TGA). It was demonstrated that the addition of all types of these metal oxides had a positive effect, such as an accelerated reactivity towards methane reduction and enhanced resistance to agglomeration. Specifically, the modification using CeO2 and ZrO2 improved the reactivity of ilmenites towards CH4 reduction at a lower temperature of 750 degrees C. However, the promotion effect decreased when the temperature was elevated to 800 degrees C. NiO modification not only enabled the ilmenite to improve reaction with CH4 due to the generation of a more active compound NiFe2O4, but also to result in higher oxygen transport capacity. Similarly, Mn2O3 modification showed a higher reactivity and a fast reaction rate towards the oxidation of CH4 attributed to the generation of ferrimanganic oxides. Furthermore, the overall oxygen transport capacity of Mn2O3 composed OCs was increased caused by the variable valence of Mn. The addition of CeO2, ZrO2, and NiO always retarded the activation process of ilmenite ore, by contrast, Mn2O3 modified samples accelerated the activation due to the irreversible phase transformation from Mn2O3 to Mn3O4 accompanied by a volume shrinking that led to a flawed particle surface reducing the diffusion resistance. (C) 2017 Published by Elsevier Ltd.