Applied Energy, Vol.195, 414-425, 2017
Solar steam generation through bio-inspired interface heating of broadband-absorbing plasmonic membranes
Efficient solar-enabled evaporation plays a critical role in solar power-based concentration systems, photochemical plants, seawater desalination technologies, etc. However, traditional processes for solar steam generation usually depend on high-temperature heating of the bulk liquid, which requires highly concentrated solar power and suffers from high energy and optical losses. Therefore, the enhancement of solar steam generation by bio-inspired interface solar heating is proposed in this work. In this study, easy-to-prepare, flexible, and reusable plasmonic membranes (PMs) were fabricated for realizing the bio-inspired interface solar heating and continuous steam transportation through the micropores of the membranes. A solar steam generation efficiency of similar to 85% was achieved at an illumination power of 10 kW m(-2). The effects of Au concentration in the membranes and optical power on the steam generation efficiency were systemically studied. The observed high evaporation rate and efficiency were attributed to three main factors: high (similar to 90%) and broadband solar absorption, efficient photo-thermal conversion due to high plasmon dissipation losses, and fast capillary flow in the membrane micropores. Finally, the application of PMs in a single basin solar still system for seawater desalination was investigated and the PMs exhibited great performance on enhancing the productivity of clean water. (C) 2017 Elsevier Ltd. All rights reserved.
Keywords:Solar steam generation;Plasmonic membranes;Heat localization;Solar still;Photo-thermal conversion