We present coarse-grained simulation results for enhanced ion diffusion in a charged nanopore grafted with ionomer sidechains. The pore surface is hydrophobic and its diameter is varied from 2.0 nm to 3.7 nm. The sidechains have from 2 to 16 monomers (united atom units) and contain sulfonate terminal groups. Our simulation results indicate a strong dependence of the ion diffusion along the pore axis on the pore parameters. In the case of short sidechains and large pores the ions mostly occupy the pore wall area, where their distribution is strongly disturbed by their host sulfonates. In the case of short sidechains and narrow pores, the mobility of ions is strongly affected by the structuring and polarization effects of the water molecules. In the case of long sidechains, and when the sidechain sulfonates reach the pore center, a radial charge separation occurs in the pore. Such charge separation suppresses the ion diffusion along the pore axis. An enhanced ion diffusion was found in the pores grafted with medium-size sidechains provided that the ions do not enter the central pore area, and the water is less structured around the ions and sulfonates. In this case, the 3D density of the ions has a hollow-cylinder type shape with a smooth and uninterrupted surface. We found that the maximal ion diffusion has a linear dependence on the number of sidechain monomers. It is suggested that the maximal ion diffusion along the pore axis is attained if the effective length of the sidechain extension into the pore center (measured as twice the gyration radius of the sidechain with the Flory exponent 1/4) is about 1/3 of the pore radius. (C) 2017 Elsevier Ltd. All rights reserved.