Electrochimica Acta, Vol.236, 318-326, 2017
Influence of the electrode/electrolyte interface structure on the performance of Pr0.8Sr0.2Fe0.7Ni0.3O3-delta as Solid Oxide Fuel Cell cathode
The effect of gadolinium-doped ceria (GDC) interlayer on the Pr0.8Sr0.2Fe0.7Ni0.3O3-delta (PSFN8273) cathode performance and stability in solid oxide fuel cell (SOFC) operating conditions is investigated. Two different symmetrical half-cells, with dense GDC electrolyte pellet (GDC/PSFN cell) and with GDC interlayer deposited on yttria stabilized zirconia pellet (YSZ) (YSZ/GDC/PSFN cell), are prepared and characterized by electrochemical impedance spectroscopy (EIS) as a function of temperature. The fitting of the data is carried out using an adapted Equivalent Circuit (EC). The polarization resistance (R-p) is higher for the YSZ/GDC/PSFN cell compared to GDC/PSFN cell. This increase is assigned to the interface microstructure. Then, the electrochemical properties of the half-cell with GDC interlayer are measured in three-electrode configuration under dc cathodic overpotential. In addition, the long-term stability is evaluated through an ageing test applying a current density of -123 mA.cm (-2) for 1000 hours at 700 degrees C under air. PSFN8273 appears to be stable as cathode with a decrease in overpotential of about 6% in the first 200 hours and a subsequently stabilization. These results mean that even if the GDC interlayer affect the cathode performance (in terms of R-p) it did not influence its stability, making PSFN8273 a suitable material as cathode for SOFC application. (C) 2017 Elsevier Ltd. All rights reserved.
Keywords:SOFC cathode;praseodymium strontium ferro-nickelate;perovskite;ceria doped buffer layer;electrochemical properties;cathodic polarization resistance