The minimum in-line coalescence height of bubbles generated from a submerged nozzle was investigated experimentally in shear thinning non-Newtonian fluid at lower Reynolds number (2 similar to 60). Carboxymethyl cellulose sodium (CMC) aqueous solution and carbon dioxide were used as the liquid phase and the gas phase, respectively. The process of the formation, movement and in-line coalescence of bubbles was visualized and recorded by a high-speed digital camera. The influences of bubble size, bubble generation frequency and liquid property on the minimum in-line coalescence height of bubbles were investigated by changing nozzle diameter, gas flow rate and the mass concentration of CMC aqueous solutions. For a given liquid, the generating frequency and size of bubbles increased but the minimum coalescence height of in-line bubbles decreased when the nozzle diameter and gas flow rate were increased. When the nozzle diameter and gas flow rate were fixed, the shear-thinning effect of CMC aqueous solution became stronger with increasing CMC mass concentration, which led to the increase in both the terminal rise velocity and average acceleration of the trailing bubble, consequently, the minimum in-line coalescence height of bubbles decreased. An empirical correlation for estimating the minimum in-line bubble coalescence height was proposed, the calculating values accords well with experimental data with a mean relative deviation only 7.6%. (C) 2017 Elsevier Ltd. All rights reserved.