Activated carbon injection has been proven to be an effective control technology of mercury emission from coal-fired power plants. Petroleum coke is a waste by-product of petroleum refining with large quantities readily available around the world. Due to its high inherent sulfur content, petroleum coke is an attractive raw material for developing mercury capture sorbent, converting a waste material to a value-added product of important environmental applications. In this study, petroleum coke was brominated by chemical-mechanical bromination. The brominated petroleum coke was characterized for thermal stability, mercury capture capacity, and potential mercury and bromine leaching hazards. Bromine loaded on the petroleum coke was found to be stable up to 200 degrees C. Even after treating the brominated petroleum coke for 30 min at 600 degrees C, 1/3 bromine remained on the solid. The sorbent from bromination of sulfur-containing petroleum coke was shown to be a promising alternative to commercial brominated activated carbon for capture of elemental mercury from coal combustion flue gases. (C) 2017 Elsevier B.V. All rights reserved.