Journal of Power Sources, Vol.349, 130-137, 2017
Investigation of La1-xSmx-ySryCoO3-delta cathode for intermediate temperature solid oxide fuel cells
La1-xSmx-ySryCoO3-delta (LSSC; x = 0.475, 0.650, 0.825, y = 035, 0.40, 0.45) compounds, which have the same compositions as the La0.7Sr0.3CoO3-delta (LSC) and Sm0.5Sr0.5CoO3-delta (SSC) mixture (corresponding mole ratio is 3:1, 1:1 and 1:3, respectively), are synthesized through a conventional solid-state reaction and characterized by X-ray diffraction, thermal expansion coefficient, X-ray photoelectron spectrometer and electrical conductivity measurement, as well as the electrochemical impedance spectra and single cell performance measurement. Interestingly, the experimental results reveal that with the linear increase of y in LSSC, the conductivity of the corresponding samples does not alter linearly but reaches a peak when y = 0.35, namely, the maximum electrical conductivity enhancing from 2148 S cm-1 (LSC, y = 0.30) and 1802 S cm(-1) (SSC, y = 0.50) to 2750 S cm(-1) (y = 0.35). In addition, this turning point coincidently corresponds to the structure transition from hexagonal (y = 035) to orthorhombic (y = 0.40). Furthermore, comparing with LSC and SSC, the cathode polarization resistance (Rp) decreases by about 50% and 38%, respectively, after employing the LSSC (y = 0.40) compound as cathode at 800 degrees C and 0.21 atm p(O-2), which also leads to an increment of 49% and 31% respectively in peak power density. These results imply promising applications of such effective cathodes for intermediate temperature solid oxide fuel cells. (C) 2017 Elsevier B.V. All rights reserved.
Keywords:Solid oxide fuel cell;Electrical conductivity;Electrochemical performance;Lanthanum strontium cobaltite;Samarium strontium cobaltite