Porous media play an important role in the process of storage energy. In this paper, the influence of porous media on the performance of a double pass hybrid PV/thermal air collector was achieved by building an experimental set-up for this purpose. The study showed that using porous media expanded the area of heat transfer and thus increased the thermal efficiency and temperature of the exit air from the hybrid solar collector. The compound efficiency was increased (3%) after using the porous medium in the lower ducts of the double-pass hybrid collector. At the same time, the pressure drop was increased after using the porous media. In this analysis, it was concluded that the hybrid solar collector with porous media and glass cover is more thermally efficient than the other design form. The results showed a rise in the electrical efficiency with the increase of the fluid flow rate. This increse in the value of the electrical efficiency was due to the higher volumetric air flow which enhanced the PV panel cooling. Also, the results displayed that fixing a glass layer on the hybrid collector caused the rise in thermal efficiency and reduction in the electrical efficiency of the hybrid collector. The highest value for the daily thermal efficiency was 80.23% in the collector that used porous media and glass cover, while the higher value for the thermal efficiency was 51.25% without porous media and glass cover. Also, the highest value for the daily electrical efficiency was 8.7% in the collector that used porous media and the higher value for the daily electrical efficiency was 10.91% without porous media and without glass cover. The use of porous media and glass cover in the hybrid system is a desirable option when using the hybrid system for electrical generation only. (C) 2017 Elsevier Ltd. All rights reserved.